Great Lakes Aero Products, Terms and Conditions

TERMS & CONDITIONS

WARRANTY:

GLAP windshields and windows are warranted against defective workmanship and materials.
The warranty is limited to the replacement of defective parts only, and does NOT cover installation costs.
GLAP recommends inspecting parts prior to any attempt of installation. To do this simply peal back half of the paper on both sides and replace the paper when inspecting the other half.
The Warranty does NOT cover damage from transit, improper installation, crazing, cracks, scratches or breakage from the installation.
Items returned without the original protective paper may be refused.
Contact GLAP for further warranty information.

PARTS INFORMATION:

All Windshields and Windows are FAA/PMA Approved unless otherwise noted.
Parts are trimmed as close as aircraft variation allows.
Windshields and windows have the appropriate PMA & STC information included in the price of the part.
A copy of the STC is included in the price of STC’d parts.
GLAP STC’s can not be purchased separately from a part.
GLAP recommends that all installations are done by a certified A&P, and the proper installation manuals, installation procedures & practices recommended by the aircraft manufacturer are followed.
Windshields and windows are made from Acrylic sheet conforming applicable portions of ASTM D-4802, LP-391 & MIL-P-5425-D
All parts are shipped with appropriate insurances.

FAR (Federal Aviation Regulation) 23.775 states that Windshields and Windows in front of the pilot may have a minimum light transmittance of 70%. The Green (2111) and Gray (2515) tints have a tint of approx light transmittance of approximately 75%.
Inner and Outer windows in front of the pilot may not both be tinted, only one window may be tinted, the other must be clear. Some applications such as the PA-31 use tinted inner windows and the outer must be clear, most other aircraft the outer window is tinted and the inner is clear.
Most Outer Non-Pressurized windshields and windows are available in Clear, “EZ-Eye” Green (2111) and “Solar” Gray (2115) unless otherwise noted in our the catalog or on-line.
Skylights and Windows behind the pilot are available in Other darker Tints.
Dark Gray (2064) (approximately 40% light transmittance or 60% tint is stocked for most thickness acrylic and available for no extra charge. Other tints (Special OUT-OF-STOCK colors may be subject to extra charges).
Some tints may not be available.
Landing light lens’ and Pressurized windshields are available in clear ONLY.

Windshields & windows may be trimmed to the size of a customer supplied part or specifications.
There is no extra charge with custom trimming if we receive the details as to how to trim the part before we ship.
Advance notification of shipping the original window or template to us is required.
In the event you decide to have this service done AFTER receiving any window from us, all shipping charges will be the sole responsibility of the customer and there may be a $25.00 charge or more per window (depending on quantity of windows) per order.
Custom Trimmed parts are NOT returnable.
Special size or unusual shaped sheet is NOT returnable.
NO RUSH ORDERS ACCEPTED on custom trimming.

Custom parts are those parts that are not listed in this catalog.
We are able to make custom acrylic or polycarbonate parts for automobiles, boats or aircraft with a customer supplied part.
Custom parts may be subject to a tooling set up charge.
Prices are calculated by size, trim, shape and complexity of the part.
Each part is assessed on an individual bases for price.
The customer is responsible for sending us tooling or an original part to be copied.
An 8110-3 Form (One time Design Approval) may be supplied upon request for , A $30 Fee may apply for the FAA/DER (Designated Engineering Representative) services. (May require 337 Field Approval)
GLAP reserves the right not to make custom parts.

BULK RATE:

Aircraft Manufactures, Maintenance shops, Paint Shops, Dealers, Distributors, Fixed Base Operators, etc. may qualify for a discount. A Tax ID number, Company name and other information may be required for discounts.
In the event the order needs to be specially crated there may be a separate crate charge..

8130-3 Forms

GLAP Supplies 8130-3 Forms Free of charge for International Sales. United States Customers requesting an 8130-3 Form for non-export will be charged an additional $30.00 per order.

Prices are FOB Flint, MI. USA
We attempt to ship the least expensive (best) way.
Please note that UPS, Fed-Ex and other carriers no longer measure with a Girth + Length calculation for our unusual shaped boxes. Most 1 piece windshields are now “OS3” and may be assessed an extra $50 charge from these carriers.
We receive discounts from several freight companies to get the best price for the customer.
COD’s are accepted through UPS and Fed-Ex Only at this time.
We will not ship Freight or USPS C.O.D.
In Some cases it may be less expensive to ship truck freight than to ship UPS or Fed Ex, in this case it will be the decision of the customer to choose how they want their parts shipped.
.

A.O.G. “Aircraft on Ground” SERVICES

A.O.G. orders receive top priority, and are shipped ASAP. Customers wishing to receive AOG service may receive a $25.00 fee for each part.
.

Windshields and Windows are returnable.
Custom Parts or Custom Trimmed parts are NOT eligible for return.
NON-factory original colors may be subject to refusal of return.
A full refund will be given for parts returned within the first 30 days of the invoice (less shipping).
Parts returned from day 31 of the invoice through day 90 may be charged a 20% restock charge ( less shipping )
91 or more days contact GLAP
Returned parts may NOT be modified, trimmed, scratched etc. Parts must be in new sellable condition.
It is the customers responsibility to insure and pack all packages appropriately. If the package is damaged and uninsured it will be the Customers responsibility.
The Original protective paper must be applied to all windshields and windows when returned.
Any PMA (Approval) tags we apply has to be attached or returned with the part to receive refund.
Freight charges can not be refunded.
Contact GLAP to get a return authorization.
Returned parts without the knowledge of GLAP may be refused.
.